Lets Design, Implement and do Administration of ESX3

Virtualization with VMWare Infrastructure 3.0

ESX,Storage and HBACMD’s -01

Posted by Preetam on September 1, 2008

Found good article on how manage HBA and listed some command output

[root@FirstESX hbanyware]# ./hbacmd listhbas

Manageable HBA List

Port WWN   : 10:00:00:00:c9:4f:47:6f
Node WWN   : 20:00:00:00:c9:4f:47:6f
Fabric Name: 00:00:00:00:00:00:00:00
Flags      : 8000fa00
Host Name  : FirstESX.vmzare.com
Mfg        : Emulex Corporation

Port WWN   : 10:00:00:00:c9:49:06:da
Node WWN   : 20:00:00:00:c9:49:06:da
Fabric Name: 00:00:00:00:00:00:00:00
Flags      : 0000f902
Host Name  : FirstESX.vmzare.com
Mfg        : Emulex Corporation

******************************************************************************************************************************

[root@FirstESX hbanyware]# ./hbacmd HBAAttrib 10:00:00:00:c9:4f:47:6f

HBA Attributes for 10:00:00:00:c9:4f:47:6f

Host Name      : FirstESX.vmzare.com
Manufacturer   : Emulex Corporation
Serial Number  : MS53963943
Model          : LP10000
Model Desc     : Emulex LP10000 2Gb PCI-X Fibre Channel Adapter
Node WWN       : 20 00 00 00 c9 4f 47 6f
Node Symname   :
HW Version     : 1001206d
Opt ROM Version:
FW Version     : 1.90A4 (T2D1.90A4)
Vender Spec ID : 10DF
Number of Ports: 1
Driver Name    : lpfcdd_732
Device ID      : FA00
HBA Type       : LP10000
Operational FW : SLI-2 Overlay
SLI1 FW        : SLI-1 Overlay 1.90a4
SLI2 FW        : SLI-2 Overlay 1.90a4
IEEE Address   : 00 00 c9 4f 47 6f
Boot BIOS      : Boot Bios Firmware5.00a7
Driver Version : 7.3.2_vmw; HBAAPI(I) v2.0.f, 12-01-03

******************************************************************************************************************************

[root@FirstESX hbanyware]# ./hbacmd HBAAttrib 10:00:00:00:c9:49:06:da

HBA Attributes for 10:00:00:00:c9:49:06:da

Host Name      : FirstESX.vmzare.com
Manufacturer   : Emulex Corporation
Serial Number  : MS51195140
Model          : LP9002
Model Desc     : Emulex LP9002 2Gb PCI Fibre Channel Adapter
Node WWN       : 20 00 00 00 c9 49 06 da
Node Symname   :
HW Version     : 2002606d
Opt ROM Version:
FW Version     : 3.92A2 (C2D3.92A2)
Vender Spec ID : 10DF
Number of Ports: 1
Driver Name    : lpfcdd_732
Device ID      : F900
HBA Type       : LP9002
Operational FW : SLI-2 Overlay
SLI1 FW        : SLI-1 Overlay 3.92a2
SLI2 FW        : SLI-2 Overlay 3.92a2
IEEE Address   : 00 00 c9 49 06 da
Boot BIOS      : Disabled
Driver Version : 7.3.2_vmw; HBAAPI(I) v2.0.f, 12-01-03

******************************************************************************************************************************

[root@SecondESX hbanyware]# ./hbacmd PortAAttrib 10:00:00:00:c9:49:06:da

Port Attributes for 10:00:00:00:c9:49:06:da

Node WWN            : 20 00 00 00 c9 49 06 da
Port WWN            : 10 00 00 00 c9 49 06 da
Port Symname        :
Port FCID           : 0001
Port Type           : Private Loop
Port State          : Operational
Port Service Type   : 12
Port Supported FC4  : 00 00 01 20 00 00 00 01
                      00 00 00 00 00 00 00 00
                      00 00 00 00 00 00 00 00
                      00 00 00 00 00 00 00 00
Port Active FC4     : 00 00 01 00 00 00 00 01
                      00 00 00 00 00 00 00 00
                      00 00 00 00 00 00 00 00
                      00 00 00 00 00 00 00 00
Port Supported Speed: 2 GBit/sec.
Port Speed          : 1 GBit/sec.
Max Frame Size      : 2048
OS Device Name      : /proc/scsi/lpfc/0
Num Discovered Ports: 16
Fabric Name         : 00 00 00 00 00 00 00 00

Advertisements

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: